Face Mounting Brackets - Arched, Artisan, Metropolitan, Victorian Lace - Travis Industries 33 DVI Insert Owner's Manual

12
Installation (for qualified installers only)
Face Mounting Brackets – Arched, Artisan, Metropolitan, Victorian Lace
Some Arched, Artisan, Metropolitan and Victorian Lace Faces include old brackets that will not mount to
the heater (see illustration below). For these faces, make sure to use the new mounting brackets (either
included with the heater or available through your dealer - SKU 225-20054).
WARNING: When attaching the Victorian Lace Face, do not over-tighten the screws. Over-tightening
the screws may damage the face – simply tighten the screws until they contact the face.
NOTE: The brackets install into the
lower pair of holes on the insert.
© Travis Industries
New Brackets Old Brackets
4120319
Install the face mounting
brackets with the included nuts.
NOTE: The brackets
install with this pair of
closely spaced flanges at
the top.
100-01237_000