Working And Certified Are Different; Reload Working - Alcatel-Lucent OmniSwitch 6800 Series Getting Started Manual

Working and Certified Are Different

If the software in the /flash/working directory differs even
slightly from the software in the /flash/certified directory, the
switch will automatically run from the /flash/certified direc-
tory.
Working
Directory
revised_boot.cfg
Hbase.img
Hrelease.img
Working and Certified
Etc.
contents are different.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
When the switch runs from the /flash/certified directory,
configuration changes cannot be saved via the write memory
command.
June 2007
Working
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Certified
The switch runs
Directory
from Certified.
boot.cfg
Hbase.img
Hrelease.img
Etc.
My Working and Certified directories are different. Can
I force a reboot from the Working directory?
Yes. If its configuration and image files are known to be reli-
able, you can override the default and initiate a reboot from the
/flash/working directory. This is done via the

reload working

command. For more information, refer to
your OmniSwitch CLI Reference Guide.
Working
Directory
revised_boot.cfg
Hbase.img
Hrelease.img
Working and Certified
Etc.
contents are different.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Note. For detailed information on using directories, refer
to the "Managing CMM Directory Content" chapter in the
OmniSwitch 6800/6850/9000 Switch Management Guide.
The reload working
Working
command overrides
Directory
the default; the
switch runs from
revised_boot.cfg
Working.
Hbase.img
Hrelease.img
Etc.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Files and Directories 23