Problem Solving Guide - Miele H 5460 BP Operating And Installation Instructions

Oven
Hide thumbs Also See for H 5460 BP:
Table of Contents

Advertisement

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
,
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Ensure current is not supplied until after maintenance or repair work has been
carried out.
Problem
The oven does not
heat up.
The halogen lamp
needs replacing.
Possible cause and remedy
– Check if the system lock has been activated.
– Check whether the demo mode has been activated (see
"Settings - Showroom programme").
– Check whether the mains fuse has tripped. If it has,
contact a qualified electrician or Miele.
Light in the roof:
^ Disconnect the appliance from the electricity supply.
Switch off and unplug at the socket, or remove the fuse,
or switch off at the isolator as appropriate.
^ Unscrew the lamp cover and the seal.
^ Change the halogen lamp.
When purchasing a new lamp, take the old one with you
to make sure you obtain the correct replacement (Osram
66275, 230 V, 25 W, G9, heat resistant to 300 °C).
^ Screw the lamp cover and the seal back on again.

Problem solving guide

49

Advertisement

Table of Contents
loading

This manual is also suitable for:

H 5360 bp

Table of Contents