Table of Contents
Advertisement
Problem
Browning is uneven. There will always be a slight unevenness. If browning is
A fault code
appears in the
display. F + number
Possible cause and remedy
very uneven, check
with Fan plus U:
– whether the temperature was set too high,
– whether the correct shelf level was used.
with Conventional heat V:
– the colour and material of the baking tins being used.
Light coloured, shiny, or thin walled tins are less suitable.
– whether the correct shelf level was used.
You can rectify the following fault codes yourself:
– F 23: The pyrolytic temperature of approx. 460 °C was
not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault message appears again please contact the
Miele Service Department.
– F 32: The door has not locked for the pyrolytic cleaning
process.
Switch the oven off and start the pyrolytic cleaning
process again.
If the fault code appears again call the Miele Service
Department.
– F 33: The door lock for the pyrolytic cleaning process will
not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the door lock will still not open please
contact the Miele Service Department.
Problem solving guide
51
Advertisement
Table of Contents
