Table of Contents
Advertisement
Pyrolytic
A message will appear in the display
after a certain length of time to remind
you to run a pyrolytic cleaning
programme. You can disable this
message if you do not wish to be
reminded. Confirm the option "Without
reminder".
Heating phase
The heating phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
– "Rapid"
All the heating elements are switched
on together in order to heat the oven
up as quickly as possible to the
required temperature.
– "Normal"
Only the heating elements for the
cooking function selected are
switched on.
Recommended temperature
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
^ Select the function you want and
change the temperature within the
range allowed.
Display
You can change the contrast or
brightness of the display with the ; or
? sensors.
The setting is represented by a bar with
seven segments. The middle setting is
displayed by a filled-out segment in the
middle of the bar.
NH H H TTTTT H H HN
To change the setting, move the filled-
out segment to the left or right.
Volume
Buzzer tones
You can change the volume of the
buzzer by using the ; or ? sensor to
move the filled-out segment to the left
or right. If none of the segments is
filled-out, all buzzers are switched off.
Keypad tone
You can change the volume of the
keypad tone which sounds each time a
sensor is touched, by using the ; or ?
sensor to move the filled-out segment
to the left or right. If none of the
segments is filled-out, the keypad tone
is switched off.
Settings
33
Advertisement
Table of Contents
