Pnp/Pci Configurations - Foxconn C51XEM2AA User Manual

PnP/PCI Configurations

v Init Display First
This option is used to set which display device will be used first when your PC
starts up.
vReset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ, DMA, and I/O addresses each time the machine is turned on.
vResources Controlled by
Use this option to determine if IRQ resources are automatically assigned or
manually assigned
vIRQ Resources
Press <Enter> to manually assign IRQ resources.
vPCI/VGA Pallette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g. colors not accurately displayed).
vMaximum Payload Size
This option is ued to set maximum TLP payload size for PCI Express devices.
vMaximum ASPM
Enable/Disable Advance State Power Management
PnP/PCI Configurations Menu
Chapter 3 BIOS Description
41