Foxconn C51XEM2AA User Manual page 35

Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large or Auto mode.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
Auto Recommended mode
Drive A
This option allows you to select the kind of FDD to be installed, including "None",
[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].
Halt On
This category determines whether or not the computer will stop if an error is
detected during powering up.
All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Memory
This is a Display-Only Category, determined by POST (Power On Self Test) of
the BIOS.
Base Memory
Extended Memory The BIOS determines how much extended memory
Total Memory
28
Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.
The system boot will not stop for any errors that may
be detected.
The system boot will not stop for a keyboard error; but
it will stop for all other errors.
The system boot will not stop for a diskette error; but
it will stop for all other errors.
The system boot will not stop for a keyboard or disk
error, but it will stop for all other errors.
The BIOS POST will determine the amount of base (or
conventional) memory installed in the system.
is present during the POST.
Total memory of the system.
Chapter 3 BIOS Description