Memory - Foxconn C51XEM2AA User Manual

Memory

This motherboard includes four 240-pin slots with 1.8V for DDR2. These slots
support 256 Mb, 512 Mb and 1 Gb DDR2 technologies for x8 and x16 devices, and
support dual channel DDR2 memory technology up to 10.7GB/s. You must install
at least one memory bank to ensure normal operation.
Recommended Memory Configurations
The following table list is the recommended memory configurations. Please
install the memory according to the list.
Mode
Single Channel
Dual Channel
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
14
DIMM1
Populated
Populated
Populated
Populated
Populated Populated
128 Pins
Chapter 2 Installation Instructions
DIMM2 DIMM3
Populated
Populated
Populated
112 Pins
DIMM4
Populated
Populated
Populated