Pptp - D-Link DIR-615 User Manual

Secton  - Configuraton
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet
Enter the Primary and Secondary DNS Server
Mask:
Addresses (Static PPTP only).
PPTP Gateway:
Enter the Gateway IP Address provided by your
ISP.
PPTP Server IP:
Enter the Server IP provided by your ISP
(optional).
Username:
Enter your PPTP username.
Password:
Enter your PPTP password and then retype the
password in the next box.
Reconnect Mode:
Select either Always-on, On-Demand, or
Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time:
Auto-reconnect.
DNS Servers:
The DNS server information will be supplied by your ISP (Internet Service Provider.)
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the
default MTU.
D-Lnk DIR-615 User Manual

PPTP