Connect.to.a.wireless.network; Using Windows Vista - D-Link DIR-615 User Manual

Secton 5 - Connectng to a Wreless Network
Connect to a Wireless Network

Using Windows Vista

®
Windows Vista ® users may use the built-in wireless utility. If you are using another company's utility or Windows ® 2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities
will have a "site survey" option similar to the Windows Vista utility as seen below.
®
If you receive the Wireless.Networks.Detected bubble, click
on the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select Connect. to. a.
network.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking.
Basics section in this manual for more information.
D-Lnk DIR-615 User Manual 6