System Board - HP 630 Maintenance And Service Manual

11. If it is necessary to replace the wireless antenna cable and transceiver:
a. Release the wireless antenna transceiver (1) from the display enclosure. (The wireless
antenna transceiver are attached to the display enclosure with double-sided tape.)
b. Release the wireless antenna cable from the clips (2) built into the display enclosure.
c. Remove the wireless antenna cable and transceiver (3). The wireless antenna cable and
transceiver are available in the Antenna Kit, spare part number 646111-001.
Reverse this procedure to reassemble and install the display assembly.

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use only with computer models equipped with an AMD Athlon II, Phenom II, Turion II, or V-
Series processor and a graphics subsystem with discrete memory
For use only with computer models equipped with an AMD Athlon II, Phenom II, Turion II, or V-
Series processor and a graphics subsystem with UMA memory
For use only with computer models equipped with an AMD E350 1.60-GHz processor
For use only with computer models equipped with an AMD E240 1.50-GHz processor
For use only with computer models equipped with an Intel Dual Core i5 or i3 processor, a graphics
subsystem with discrete video memory, and 1024-MB of graphics subsystem memory
For use only with computer models equipped with an Intel Dual Core i5 or i3 processor, a graphics
subsystem with discrete video memory, and 512-MB of graphics subsystem memory
For use only with computer models equipped with an Intel Dual Core i5 or i3 processor, and a
graphics subsystem with UMA video memory
74 Chapter 4 Removal and replacement procedures
Spare part number
646981-001
646982-001
646980-001
646979-001
646672-001
646673-001
646671-001