Hard Drive - HP 630 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive connector cable, bracket, or
screws. The hard drive connector cable is included in the Cable Kit, spare part number 646119-001.
The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number
646122-001.
Description
750-GB, 5400-rpm
640-GB, 5400-rpm
500-GB, 7200-rpm
500-GB, 5400-rpm
320-GB, 7200-rpm
320-GB, 5400-rpm
250-GB, 7200-rpm
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module/wireless module compartment cover (see
only) on page
Remove the hard drive:
1. Loosen the captive screw (1) that secures the hard drive compartment cover to the computer.
50 Chapter 4 Removal and replacement procedures
Battery on page
44).
43).
Spare part number
634250-001
603785-001
634925-001
634638-001
641672-001 and
634862-001
645193-001 and
622643-001
649902-001 and
634861-001
Optical drive (select models