HP 630 Maintenance And Service Manual page 96

Description
Intel Celeron DC T3300 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC B950 2.10-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC B940 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC C925 2.30-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC C900 2.20-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC B810 1.60-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Optical drive (see
Hard drive (see
WLAN module (see
Keyboard (see
Top cover (see
System board (see
Fan and heat sink (see
Remove the processor:
1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise (1), until you hear a click.
Battery on page 43), and then remove the following components:
Optical drive (select models only) on page
Hard drive on page 50)
WLAN module on page
Keyboard on page 53)
Top cover on page 56)
System board on page
Fan/heat sink assembly on page
44)
47)
74)
79)
Component replacement procedures
Spare part number
592399-001
653338-001
653337-001
636636-001
534419-001
646760-001
87