Locating parts on the system board
The following figure shows the locations of the parts on the system board.
Figure 4. System board part locations
1
PS/2 adapter connector
3
Microprocessor 12 V power connector
5
Memory fan connector
7
Memory slot 3 (DIMM3)
9
Memory slot 4 (DIMM4)
11
Hard disk drive enablement module (optional)
13
Front fan connector
15
SATA connectors 1 and 2 (SATA 3.0 connectors)
17
SATA/SAS connectors for the hard disk drive (3)
19
Cover presence switch connector (Intrusion
switch connector)
21
Clear CMOS /Recovery jumper
23
eSATA connector (for connecting eSATA
adapter)
78
ThinkStation S30 Hardware Maintenance Manual
2
Microprocessor fan connector
4
Microprocessor
6
Hard disk drive fan connector
8
Memory slot 7 (DIMM7)
10
Memory slot 8 (DIMM8)
12
24-pin power connector
14
Internal USB 2.0 connector
16
SATA connectors 3 and 4 (SATA 2.0 connectors)
18
Hard disk drive LED (LSI)
20
Front USB 2.0 connector (for connecting the front USB 2.0
ports if applicable)
22
Internal USB 2.0 connector (for connecting the media card
reader)
24
Auxiliary LED connector