Locating Frus And Crus - Lenovo ThinkStation S30 Hardware Maintenance Manual

Connector
Audio line-in connector
Audio line-out connector
DisplayPort connector
DVI monitor connector
Ethernet connector
Microphone connector
Mini DisplayPort connector
PS/2 keyboard connector
(optional)
PS/2 mouse connector
(optional)
Serial connector
USB 2.0 connector
USB 3.0 connector

Locating FRUs and CRUs

The following figure shows the locations of the major FRUs and CRUs in the computer. To remove the
computer cover, see "Removing the computer cover" on page 82.
Used to receive audio signals from an external audio device, such as a stereo
system. When you attach an external audio device, a cable is connected between
the audio line-out connector of the device and the audio line-in connector of the
computer.
Used to send audio signals from the computer to external devices, such as powered
stereo speakers (speakers with built-in amplifiers), headphones, multimedia
keyboards, or the audio line-in connector on a stereo system or other external
recording device.
Used to attach a high-performance monitor, a direct-drive monitor, or other devices
that use a DisplayPort connector.
Used to attach a DVI monitor or other devices that use a DVI monitor connector.
Used to attach an Ethernet cable for a local area network (LAN).
Note: To operate the computer within FCC Class B limits, use a Category 5 Ethernet
cable.
Used to attach a microphone to your computer when you want to record sound or if
you use speech-recognition software.
Used to attach a high-performance monitor, a direct-drive monitor, or other devices
that use a mini DisplayPort connector. The mini DisplayPort connector is a
miniaturized version of a DisplayPort connector.
Used to attach a keyboard that uses a PS/2 keyboard connector. This connector is
available when you have an optional PS/2 keyboard and mouse adapter installed
in your computer.
Used to attach a mouse, a trackball, or other pointing devices that use a PS/2
mouse connector. This connector is available when you have an optional PS/2
keyboard and mouse adapter installed in your computer.
Used to attach an external modem, a serial printer, or other devices that use a
9-pin serial connector.
Use this connector to attach a device that requires a USB 2.0 connection, such as a
keyboard, a mouse, a scanner, a printer, or a personal digital assistant (PDA).
Use this connector to attach a device that requires a USB 2.0 or 3.0 connection,
such as a keyboard, a mouse, a scanner, a printer, or a personal digital assistant
(PDA).
Description
Chapter 9
75
.
Locations