Uefi Diagnostic Program - Lenovo ThinkStation S30 Hardware Maintenance Manual

UEFI diagnostic program

A UEFI diagnostic program is preinstalled on the computer. It enables you to test memory modules and
internal storage devices, view system information, and check and recover bad sectors on internal storage
devices.
To run the UEFI diagnostic program, do the following:
1. Turn on the computer. If the computer cannot be turned on, go to "Basic troubleshooting" on page
35. If an error code is displayed, go to Chapter 8 "Symptom-to-FRU Index" on page 67 for error code
descriptions and troubleshooting hints.
2. Repeatedly press and release the F10 key when turning on the computer. The main screen of the
UEFI diagnostic program is displayed.
3. Follow the instructions on the screen to use the diagnostic program.
The options on the main screen are as follows:
Table 2. Items on the main screen of the UEFI diagnostic program
DIAGNOSTICS
• LCD test
• Memory - Quick test
• Memory - Extended test
• Motherboard test
• PCI-e test
• Storage - Quick test
TOOLS
• System information
• Recover bad sectors tool
• Generate configuration file
• Execute from configuration file
• Exit application
.
Chapter 5 Troubleshooting and diagnostics
53