Connecting The Fbu Adapter Cable To The Fbu; Installing The Fbu With The Holder - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

Figure 130: Installing the FBU in the holder (B)
Ê Ensure that the FBU is properly seated in the holder as shown.
9.5.2.4

Connecting the FBU adapter cable to the FBU

Figure 131: Connecting the FBU adapter cable to the FBU
Ê Connect the cable end on the FBU to the FBU adapter cable as shown.
9.5.2.5

Installing the FBU with the holder

Ê Install the FBU with the holder as described in section
with the holder" on page
RX100 S8
188.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the BBU
193