Ê If the BBU status does not change after 8 hours, please try to initiate the
recalibration process manually using the ServerView RAID Manager.
I
If this procedure still does not fix the BBU status, please contact your
local Fujitsu customer service partner.
9.5.2
Installing an FBU
Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver (for installing TFM)
9.5.2.1
Preliminary steps
"Disabling SVOM boot watchdog functionality" on page 64
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
9.5.2.2
Installing TFM to the RAID controller (if applicable)
Figure 127: TFM kit
1
TFM
RX100 S8
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 15 minutes
2
Screws
191