Changing A Bulb - Ford Transit Owner's Manual

2. Remove the screws.
3. Pull the headlamp toward the front of
your vehicle to disengage it from its
locating points, and then lift the
headlamp up.
4. Disconnect the electrical connector.
Note: When you install the headlamp make
sure that you attach the electrical connector
correctly.
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Maintenance
Note: When you install the headlamp make
sure that you engage its locating points
correctly.

CHANGING A BULB

Switch all of the lamps and the
ignition off. Failure to do so could
result in serious personal injury.
Bulbs become hot when in use. Let
them cool down before you remove
them.
Use the correct specification bulb. See
Bulb Specification Chart (page 168).
The following instructions describe how to
remove the bulbs. Install in the reverse
order unless otherwise stated.
Note: LED lamps are not serviceable. See
an authorized dealer.
Headlamp
A
B
C
D
E
163
WARNINGS
Cornering lamp
Daytime running lamp and
headlamp high beam
Direction indicator
Headlamp low beam
Side lamp