Ford Transit Owner's Manual page 231

U RADIO: Press the button to select different radio frequency bands, it will also
cancel the menu or list browsing.
V CD: Press the button to change source to CD, it will also cancel the menu or
list browsing.
Sound Button
This will allow you to adjust the sound
settings for bass, treble, middle, balance
and fade.
1. Press the sound button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.
Radio Button
Press the RADIO button to select from the
frequency bands available.
You can use the buton to return to radio
reception when you have been listening to
another source.
Alternatively, press the left arrow button
to display the available frequency bands.
Scroll to the required frequency band and
press OK.
Station Tuning Control
Seek Tuning
Select a frequency band and briefly press
the seek up or seek down button. Seek
tuning will stop at the first radio station it
locates.
Manual Tuning
1. Press function button 2.
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Audio System
2. Use the left and right arrow buttons to
tune down or up the frequency band in
small increments or press and hold to
increment quickly, until you find a
station you want to listen to.
3. Press OK to continue listening to a
station.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
1. Press function button 3.
2. Use the seek buttons to scan up or
down the selected frequency band.
3. Press function button 3 again or OK to
continue listening to a station.
Station Preset Buttons
This feature allows you to store your
favorite stations, they can be recalled by
selecting the appropriate frequency band
and pressing one of the preset buttons.
1. Select a frequency band.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
You can repeat this on each frequency
band and for each preset button.
229