Power Steering Fluid Check; Washer Fluid Check; Draining The Fuel Filter Water Trap; Adding Power Steering Fluid - Ford Transit Owner's Manual

WARNINGS
A fluid level between the MAX and
MIN lines is within the normal
operating range and there is no need
to add fluid. A fluid level outside of the
normal operating range could compromise
the performance of the brake or clutch
systems. Have your vehicle checked
immediately.
See Technical Specifications (page 170).
Note: The brake and the clutch systems are
supplied from the same reservoir.
POWER STEERING FLUID
CHECK
WARNING
Do not allow the fluid to touch your
skin or eyes. This could cause serious
personal injury. Rinse the affected
areas immediately with plenty of water
and consult a physician.
If the power steering fluid level is between
the MAX and MIN marks add power
steering fluid that meets the correct
specification. See Technical
Specifications (page 170).
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Maintenance

Adding Power Steering Fluid

1. Remove the filler cap.
2. Add power steering fluid to the MAX
mark. Do not overfill.
3. Replace the filler cap. Turn it until you
feel a strong resistance.

WASHER FLUID CHECK

Note: The reservoir supplies the front and
rear washer systems.
When adding fluid, use a mixture of washer
fluid and water to help prevent freezing in
cold weather and improve the cleaning
capability. We recommend that you use
only high quality washer fluid.
For information on fluid dilution, refer to
the product instructions.
DRAINING THE FUEL FILTER
WATER TRAP
Do not dispose of fuel in the
household refuse or the public
sewage system. Use an authorized
waste disposal facility.
158
WARNING