Ford Transit Owner's Manual page 81

Note: The programmed time is the time at
which you need the vehicle to be warm and
ready to drive, not the time at which the
heater turns on.
Note: The programmed times must be set
at least 70 minutes in advance of the time
you wish to set.
Programming the Time Functions
Use the information display controls on
the steering wheel. See Information
Displays (page 62).
Action
1 Settings
2 Convenience
3 Park heater
1. Highlight the day on which the heater
should warm up the vehicle.
2. Select all the days on which the system
should warm up the vehicle.
3. Set the time at which the vehicle
should be warmed up and ready to
drive. Highlight the time at the top of
the menu and press the OK button. The
hours start to flash.
4. Set the hours and minutes using the
arrow buttons on the information
display controls.
Programming the Once Function
Use the information display controls on
the steering wheel. See Information
Displays (page 62).
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Climate Control
Message
79
Action
1 Settings
2 Convenience
3 Park heater
4 Once
1. Selecting this function allows you to
programme one heating cycle for one
specific day.
2. Set the time at which the vehicle
should be warmed up and ready to
drive. Highlight the time at the top of
the menu and press the OK button. The
hours start to flash.
3. Set the hours and minutes using the
arrow buttons on the information
display controls.
Switching Programmed Functions Off
Use the information display controls on
the steering wheel. See Information
Displays (page 62).
Action
1 Settings
2 Convenience
3 Park heater
Uncheck the active programmed heating
cycles as required.
Switching the Heat Now Function On
Use the information display controls on
the steering wheel. See Information
Displays (page 62).
Message
Message