Front Wheel Mount; Front Wheel Bearings; Deck Spindle; Deck Outer Spindle - Dixon Kodiak SE 5225 KOH CE Operator's Manual

Front Wheel Mount

lubricate with a grease gun, one zerk for each wheel
mount, until the grease is forced out.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies) usually maintains a good quality.

Front Wheel Bearings

lubricate with a grease gun, one zerk for each set of
wheel bearings, until the grease is forced out.
Use only good quality bearing grease.

Deck Spindle

lower the cutting deck completely.
If you use grease gun without rubber hose, the foot
plate must be removed.
lubricate with a grease gun, one zerk,
2-3 strokes.
Use only good quality bearing grease.
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.

Deck Outer Spindle

lubricate using a grease gun, one zerk, each side
2-3 strokes. Use only good quality bearing grease.
46
lUbRICatIon
Lubricating the front wheels
Deck spindle
Deck outer spindle (with belt shield removed)
8050-829
8011-732
8061-025