Blackberry Q5 User Manual page 131

User Guide
The settings that are available for each Wi-Fi network depend on the type of network you're connecting to. To find out
which settings to use, if you're connecting to a home network, see the information that came with your wireless router; if
you're connecting to a work Wi-Fi network, talk to your administrator; if you're connecting to a hotspot, see the information
provided about the hotspot or talk to an employee at the hotspot who might have details about how to connect.
Password
If the Wi-Fi network is password protected, enter the password.
SSID
The SSID is the name that the network uses to identify itself. Usually, this field is automatically filled, but if the Wi-Fi
network is hidden, you must enter the SSID to connect.
Security Type
Set the security type that the Wi-Fi network uses. Depending on the network you're trying to connect to, you might
also see Security Sub Type and Inner Link Security.
CA Certificate
Set the root certificate that your BlackBerry device should use to verify that it's connecting to the correct Wi-Fi
network.
VPN Profiles
To use a VPN Profile when connecting to the network, select the profile that you want to use.
Band Type
This field is set to Dual Band by default. If the Wi-Fi network is dual-band, your device will try to connect in the 5.0
GHz band unless the signal strength at the 2.4 GHz band is significantly stronger. If you want to connect to a dual-
band network using one band only, choose the band you prefer.
Auto Obtain IP
In most cases this switch should remain On, but if you need to manually specify an IP address for your BlackBerry
device you can set this switch to OFF and the option to enter an IP address appears.
Enable IPv6
Set whether the network uses the IPv6 protocol.
Use Proxy
Set this switch to ON if you want to connect to a proxy server. When you select this setting, additional settings
appear. To find out what settings to use, see the information provided for the proxy server.
Inter-Access Point Handover
If the network spans multiple access points, set whether your device should remain connected when you move from
one access point to another.
Connect to another device using Wi-Fi Direct
The BlackBerry device you want to connect to must have the Wi-Fi Direct tab selected on the Wi-Fi screen. To connect to
another type of Wi-Fi CERTIFIED Wi-Fi Direct-enabled smartphone, view the documentation for that device.
Settings
131