Kyocera TASKalfa 250ci Operation Manual page 37

Fax system(q)
Hide thumbs Also See for TASKalfa 250ci:
Table of Contents

Advertisement

Ready to send.
Place original.
FAX TX Resolution
Select fineness of scanning resolution.
The larger the number, the better the
image resolution.
Place original.
600x600dpi
Original
:
---
Zoom
:
100%
Paper
:
---
200x400dpi
Preview
Super Fine
Add to Addr Book
Status
OPERATION GUIDE
Destination
1
400x400dpi
Ultra Fine
200x200dpi
200x100dpi
Fine
Normal
Cancel
OK
10/10/2008
10:10
200 × 400 dpi (Super Fine): when sending
originals with minute characters and lines
Typical character size: 6 point (example:
)
Resolution
400 × 400 dpi (Ultra Fine): when sending
originals with minute characters and lines more
finely
Typical character size: 6 point (example:
)
Resolution
600 × 600 dpi (600dpi): when sending originals
with minute characters and lines as finely as
possible
Typical character size: 6 point (example:
)
Resolution
NOTE:
The default setting is 200 × 100 dpi (Normal).
The higher the resolution, the clearer the image.
However, higher resolution also means longer send
times. Normally, up to 400 × 400 dpi (Ultra Fine) is
recommended.
The machine does not support resolution of 300 × 300
dpi when sending faxes. If you have selected 300 × 300
dpi, the machine sends faxes after lowering the
resolution to 200 × 200 dpi (Fine).
The scan resolution should be equal to or higher than
the fax resolution. If the selected resolutions are not in
this condition, the machine automatically adjusts the
resolution and changes the selection.
1
To change the resolution, press [Color/Image
Quality], and then [Scan Resolution].
2
Select the resolution.
3
Press [OK].
IMPORTANT:
If you select a high resolution, the image
becomes clearer. However, the higher the
resolution is, the longer the send time is.
When you send originals at a resolution of 200
× 400 dpi (Super Fine) or higher, the fax
machine on the receiving system needs to be
capable of receiving the originals at such image
quality. When the receiving system does not
have such capability, originals are sent at an
image quality of 200 × 200 dpi (Fine).
FAX Operation (Basic)
Resolution
Resolution
Resolution
3-9
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 500ciTaskalfa 300ciTaskalfa 400ci

Table of Contents