Kyocera TASKalfa 250ci Operation Manual page 35

Ready to send.
FAX No. Entry
Pause Space
Add a new FAX destination.
Enter FAX number with the numeric keys.
Add to Addr Book Next Dest.
Status
Ready to send.
FAX No. Entry
Pause
Space
Add a new FAX destination.
Enter FAX number with the numeric keys.
Add to Addr Book Next Dest.
Status
Sub Address
Transmission Start
Speed
OPERATION GUIDE
Destination
0
Sub Address
Transmission
Backspace
Start Speed
ECM
Encrypted
Transmission
On Hook
Cancel OK
10/10/2008 10:10
Destination
0
Sub Address
Transmission
Backspace
Start Speed
ECM
Encrypted
Transmission
On Hook
Cancel OK
10/10/2008 10:10
Key
To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 4-36.
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
2 Enter the fax number of the receiving system
using the numeric keys.
NOTE:
Up to 64 digits can be entered as the fax
number of the receiving system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Backspace] on
the touch panel, and delete the digits one by one
before reentering the fax number. To delete the
number entirely, press the Clear key on the
operation panel.
When [Add to Addr Book] is displayed, you can
register entered contents to the Address Book.
[Pause]
Pressing this key adds about three seconds of
waiting time during dialing. For example, when
dialing the receiving system on an external line,
you can use this method to insert a pause before
resuming dialing after you dial a specific number.
3 If necessary, make any detailed settings.
Press each key to change the setting, and
press [OK].
Description
FAX Operation (Basic)
3-7
3