Nhrp Configuration; 2013 Cradlepoint, Inc - Cradlepoint IBR600 User Manual

COR | USER MANUAL Firmware ver. 4.2.0
CRADLEPOINT

7.5 NHRP Configuration

Next Hop Resolution Protocol is a protocol used to discover addresses of clients on Non-Broadcast Multiple Access
(NBMA) networks. It is used to create next-generation VPN technologies that allow shortcutting between spokes. With
NHRP, systems attached to an NBMA network dynamically learn the NBMA address of the other systems that are part of
that network, allowing these systems to directly communicate without requiring an intermediate hop.
The NHRP Configuration table displays the following fields for each configured NHRP interface.
• Name: Name of the GRE tunnel that
NHRP will use.
• Protocol Address/Prefix: GRE tunnel
endpoint mapping that NHRP associates
with the NBMA server.
• NBMA Address: NBMA server address
the protocol address/prefix is associated
with.
• Flags:
o SD: Shortcut-Destination
o N: Non-Caching
o S: Shortcut
o R: Redirect
Click Add to create a new NHRP interface.
• Enabled: Enabled or disable the interface.
• Name: Give the interface a unique name that matches
the mGRE (multipoint GRE) tunnel. Select from
configured GRE tunnels or input manually.
• Peer Authentication: Embeds the secret plaintext
password to outgoing NHRP packets. Incoming NHRP
packets on this interface are discarded unless this
password is present. Max length: 8 characters.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 137