Download Priority; Dscp - Cradlepoint IBR600 User Manual

COR | USER MANUAL Firmware ver. 4.2.0
CRADLEPOINT
Download Priority: The priority value has two different effects on traffic. Higher priority traffic is handled before lower
priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available it is offered to higher
priority queues first. Move the slider to select from the following options (Default: Normal):
• Lowest
• Lower
• Below Normal
• Normal
• Above Normal
• High
• Higher
• Highest
DSCP (DiffServ) Tag: Differentiated Services Code Point
(DSCP) is the successor to TOS (Type of Service). Use
this field to 'tag' the traffic by putting the value in the DSCP
header of each IP packet that flows through this queue.
Use the value of '0' to clear the existing DSCP value in the
packet header.
DSCP Tagging is sometimes used so that other networking
equipment, upstream or post-NAT, can do traffic shaping
based on the DSCP Tags as opposed to IP addresses or
ports.
This setting is optional. For more information see the
Click Finish to save this queue.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
Differentiated services Wikipedia page.
FOR MORE HELP AND RESOURCES PAGE 107