Traffic Shaping / Qos Rule Editor - Cradlepoint IBR600 User Manual

COR | USER MANUAL Firmware ver. 4.2.0
CRADLEPOINT

Traffic Shaping / QoS Rule Editor

The first page of the Traffic Shaping / QoS Rule Editor
allows you enable/disable the rule, name the rule, specify a
protocol for the rule, and select a queue to associate the
rule with.
Rule Enabled: (Default: Enabled.) Deselect this to disable
this rule. This can be useful for quickly changing
configurations. If both upload QoS and download QoS are
disabled then the rule will disable automatically.
Rule Name: Create a name for the rule that is meaningful
to you.
Protocol. The protocol used by the messages: TCP/UDP,
TCP, UDP, or ICMP. Select "Any" if your rule does not
control a specific type of message that uses a specific
protocol.
Queue Name: Select a queue to associate this rule with.
Click Next to continue to the next page.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 109