Configuration Pages - Cradlepoint ARC CBA850 Manual

Configuration Pages

The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal the following
dropdown menus.
Getting Started Status
Enterprise Cloud Manager Client List
Registration
Dashboard
First Time Setup
GPS
IP Passthrough Setup
Internet Connections
Routing
Statistics
System Logs
Getting Started – Setup wizards for Enterprise Cloud Manager, First Time Setup, and IP Passthrough.
be needed as LAN Port 2 is pre-configured.
Status – Displays various types of information about your router such as a list of clients that are attached to your networks (Client
List), the details of each Internet source your router is using (Internet Connections), and a map of your router's location (GPS).
Very few changes can be made from this tab because the primary purpose is to display information.
Network Settings – Provides configuration options for the network(s), or LAN, created by your router. For example, you can enable a
VLAN (Local Networks) or set up rules to filter websites (Content Filtering).
Internet – Provides configuration options for the Internet sources, or WAN, used by the router. For example, you can set up a rule to
track how much data you are using per month on a modem (Data Usage) or set the APN for a modem (Connection Manager).
System Settings – Provides broad administrative controls. For example, you can upgrade firmware (System Software), or enable
remote management of the router (Administration).
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Network Settings Internet
Content Filtering Connection Manager
DHCP Server Data Usage
DNS WAN Affinity/Load Balancing
Firewall
Local Networks
MAC Filter/Logging
Routing
System Settings
Administration
Device Alerts
Enterprise Cloud Manager
Serial Redirector
SNMP Configuration
System Control
System Software
NOTE: IP Passthrough Setup should not