Connection Manager; Wan Interface Profiles & Priority - Cradlepoint mbr1200 User Manual

User Manual / MBR1200B

CONNECTION MANAGER

The router can establish an uplink via Ethernet, WiFi as WAN, or 3G/4G modems (removable or external USB). If the
primary WAN connection fails, the router will automatically attempt to bring up a new link on another device: this
feature is called failover. If Load Balance is enabled, multiple WAN devices may establish a link concurrently.
WAN INTERFACE PROFILES & PRIORITY
This is a list of the available interfaces used to access the Internet. You can enable, stop, or start devices from this
section. Drag the priority icon ( ) up or down to set the interface the router uses by default and the order that it
allows failover.
Availability Key
Enable
Load Balance
LOAD BALANCE
To enable Load Balancing, select the check box for each desired
device. If this is enabled, the router will use multiple WAN
interfaces to increase the data transfer throughput by using any
connected WAN interface consecutively. Selecting Load Balance
will automatically start the WAN interface and add it to the pool
of WAN interfaces to use for data transfer. Turning off Load
Balance for an active WAN interface may require the user to
restart any current browsing session.
From WAN Management, select the Load Balance Algorithm from
the following dropdown options:
On Demand Failback
WAN Verify Data Usage
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
5/3/16
10