NordicTrack ProReflex User Manual page 9

5. Set the console assembly face-down on a soft
surface to avoid scratching the console assem-
bly. Attach the Left Accessory Tray (110) and
the Right Accessory Tray (111) to the console
assembly with eight #8 x 3/4" Screws (12).
6. With the help of a second person, hold the con-
sole assembly near the Uprights (43). Connect
the Console Ground Wire (55) to the Ground
Wire (105).
Next, connect the console wire to the Upright
Wire (93). See the inset drawing. The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON-
SOLE MAY BE DAMAGED WHEN YOU TURN
ON THE POWER. Then, insert the wires into
the Right Handrail (102) and the right Upright
(43).
5
12
110
12
6
Console
Assembly
Console
93
43
9
111
12
12
Console
Assembly
55
105
Wire
Console
102
Wire
93