2. Remove the indicated screw and the ship-
ping bracket from the Base (1). Discard the
screw and the shipping bracket.
Next, tighten the Base Foot (26) into the
Base (1).
3. Attach the Rear Stabilizer (7) to the Frame
(2) with two M10 x 127mm Screws (83).
Next, hold the handle on the Frame (2),
press the Latch (68), and lower the Frame
until the Rear Stabilizer (7) rests on the floor.
2
1
26
Screw
3
Handle
7
Shipping
Bracket
83
7
2
68