ProForm SMART STRIDER User Manual page 10

8. Insert the Pulse Wires (118) upward through
the Upright (3) as shown.
9. While a second person holds the Console
(5) near the Upright (3), connect the wires on
the Console to the Upper Wire Harness (48)
and to the Pulse Wires (118).
Insert the excess wire into the Upright (3) or
into the Console (5).
Tip: Avoid pinching the wires. Attach the
Console (5) to the Upright (3) with four M4 x
16mm Round Head Screws (101).
10. Attach the Upright Cap (4) to the Console
(5) with two M4 x 16mm Round Head
Screws (101).
8
118
9
118
3
101
10
5
4
101
10
3
118
5
48
Avoid pinching
the wires