Brother P-Touch 3600 User Manual page 92

Ch. 4 Machine Adjustments
To change the USB ID SELECTION setting:
This function allows you to specify a unique
identification number for each P-touch con-
nected to a computer in order to print through
the USB connection. Normally, for easy setup of
multiple P-touch machines connected to a com-
puter, all PT-9600/3600s will be set to
000000001, indicating that the data will be
printed on all connected P-touch machines at
the same time.
1 Hold down d and press A.
NOTE
This step may be skipped if settings for several
Setup functions are being applied at the same time.
2 Rotate r until USB ID SELECTION is dis-
played, and then press r (OR press j or
k until USB ID SELECTION is displayed).
1 2 3 4 5 6 7 8 9 A B C D E F K Q Q Q Q Q
R
R
G
05/05
R
H NO
R
USB ID SELECTION
L
R
I
M
000000001
R
J
AUTO 0.4
Length Margin
3 Rotate r (or press m or g) until the
desired setting is displayed.
NOTE
To return the function to its default setting
(000000001), press the space bar.
4 Press r (or press n) to apply the setting.
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several Setup settings
at the same time, press j or k to select the func-
tion, and then press m or g to select the desired
setting. Press n only after the necessary functions
have been set.
82
Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
HELSINKI A AUTO
Font Width Size