Brother P-Touch 3600 User Manual page 70

Ch. 3 Functions
To change the setting for the Text align-
ment function:
1 Select GLOBAL FORMAT, BLOCK FOR-
MAT or LINE FORMAT (OR hold down
d and press 1, 2 or 3) as described
on pages 52 to 53.
NOTE
This step may be skipped if settings for several for-
mat functions are being applied at the same time.
2 Rotate r until ALIGNMENT is displayed,
and then press r (OR press j or k until
ALIGNMENT is displayed). The setting for
the text at the cursor's current position is
shown on the left side of the display and a
sample can be seen on the right side.
1 2 3 4 5 6 7 8 9
R
R
G
08/13
R
H NO
R
ALIGNMENT
L M
R
I
LEFT
R
J
AUTO 0.4
Length Margin
3 Rotate r (OR press m or g) until the
desired setting is displayed.
NOTE
If "*****" appears as a setting, the Text align-
ment function has already been applied to
either a line in the current text block (if the
Block format or the Global format function is
being set) or a block in the current text (if the
Global format function is being set). Changing
the setting will cancel the setting that was previ-
ously applied.
To return the function to its default setting
(LEFT), press the space bar.
To return to the text without changing the for-
matting, press e (OR hold down d and
press 1, 2 or 3).
60
K Q Q Q Q Q
A B C D E F
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
4 Press r (OR press n) to apply the setting.
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format set-
tings at the same time, press j or k to select the
function, and then press m or g to select the
desired setting. Press n only after the necessary
functions have been set.
Text rotation function (ROTATE)
Any text block with the Text rotation function
applied is rotated 90
selecting the &REPEAT setting, the text is repeat-
edly printed for the length of the text block.
When any setting other than OFF is selected for
the text at the cursor's current position, the Text
rotation indicator at the top of the display comes
on.
1 2 3 4 5 6 7 8 9
R
R
G
<<< P-touch >>>
R
N O
H
R
L M
R
I
1:_
R
J
AUTO 0.4
Length Margin
To change the setting for the Text rotation
function:
1 Select GLOBAL FORMAT or BLOCK FOR-
MAT (OR hold down d and press 1 or
2) as described on pages 52 to 53.
°
counterclockwise. By
OFF
ON
&REPEAT
F K Q Q Q Q Q
A B C D E
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size