TROUBLESHOOTING
(8) The tape is not ejected correctly after
being automatically cut.
(9) The cutter does not cut correctly.
92
Problem
Cotton swab
Metal piece
(Area to be cleaned)
Solution
G
Turn off the machine, open the tape com-
partment cover, and remove the tape cas-
sette if one is installed.
G
Using a cotton swab, clean off the metal
piece in the exit slot to the left of cutter.
G
Change the HALF CUTTER setting. (Refer
to page 81.)
G
The cutter may be dull. Contact your serv-
ice representative.