Brother P-Touch 3600 User Manual page 100

TROUBLESHOOTING
(5) The machine has "locked up" (i.e., noth-
ing happens when a key is pressed).
(6) The half cut is either too deep or not deep
enough.
90
Problem Solution
G Reset the machine by:
- (PT-3600) unplugging the AC adaptor,
and leaving it unplugged for about one
minute, then and plugging it in again
- (PT-9600 only) pressing the reset button
in the battery compartment at the bottom
of the machine
All text and formats in the display and all
text files stored in the memory will be
erased.
G Follow the procedure on page 81 to adjust
how deep laminated tape is cut.