Intermec PB31 User Manual page 79

PB21 and PB31 Mobile Receipt Printer User Guide
Print Speed and Resolution
Print speed:
Resolution:
Print Technology
Printhead:
Maximum print width:
Media Specifications
Minimum black mark length: 3.17 mm (0.125 in)
Black mark width:
Core inside diameter:
Roll outside diameter:
Tracking:
Maximum caliper for tags:
Minimum media length:
Maximum media length:
When you order printer media, keep these points in mind:
• Tag and fanfold media use black marks as repeat indicators for
non-continuous media. Black marks are sensed on the side of the
media that is thermally sensitive.
• You can use higher caliper media in the printer, but print quality
will be reduced.
• Receipt roll stock media is supplied as a continuous roll and has
an end of roll indicator. The end of roll indicator is a red marking
(on last 3 feet of roll) on the side of the paper that is thermally
sensitive.
Appendix A — Specifications
4 ips (100 mm/s)
203 dpi (8 dots/mm)
Direct thermal
PB21 48 mm (1.8 in)
PB31 72 mm (2.8 in)
Full width of media
19.05 mm (0.75 in)
PB21 57.15 mm (2.25 in)
PB31 67.31 mm (2.65 in)
Center
0.15 mm (0.006 in)
12.7 mm (0.5 in)
Continuous
67