Cradlepoint IBR600 Product Manual page 63

IBR600| USER MANUAL Firmware ver. 3.5.1
CRADLEPOINT
If you leave these values blank, then all IP addresses and ports will be included. IP Source and IP Destination options
can be used to differentiate between the directions that packets go. You could permit packets to come from particular IP
addresses but then not allow packets to return to those addresses.
Example of an IP Filter Rule: Suppose you have opened a port in your firewall in order to run a server. Someone, Johnny, is abusing that
opening, so you would like to restrict his access. Create a rule that will deny Johnny's IP address.
Add IP Filter Rule

Name: No more Johnny

Enabled: Selected

Direction: Incoming

Action: Deny

Protocol: Any
IP Source

Network IP: 172.22.24.160 (Johnny's IP address)

Netmask: 255.255.255.255 (This netmask restricts the rule to one single address).

Port(s): 80
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 61