Cradlepoint IBR600 Product Manual page 10

IBR600 | USER MANUAL Firmware ver. 3.5.1
CRADLEPOINT
Reset: You can return your router to factory default settings by pressing and holding the Reset button. This button is
recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds to initiate reset.
Ethernet Ports: By default, the IBR600 has one WAN (Wide Area Network—your Internet source) port and one LAN
(Local Area Network) port. Each of these ports can be reconfigured, however, if you need two LAN or two WAN Ethernet
ports.
Ethernet LED:
 Solid Green – connected
 Blinking Green – data transfer activity
Micro USB: This port can be used to attach a direct firmware upgrade to enable manual firmware upgrades if necessary.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 8