Cradlepoint IBR600 Product Manual page 23

IBR600 | USER MANUAL Firmware ver. 3.5.1
CRADLEPOINT
You may have changed the administrator password during initial setup using the First Time Setup Wizard. Log in using
your personalized administrator password.
If you have forgotten your personalized password, you can reset the IBR600 to factory defaults. When you reset the
router, the administrator password will revert back to the Default Password. Press and hold the reset button on the
router unit until the lights flash (Approximately 10-15 seconds). You can then log in using the Default Password (found
on the bottom of your router).
4.1.1 Router Details
The Administrator Login page includes a quick-reference section that shows the following information:
Router Details
 Model Number: IBR600
 Internet Connection: Connected/Disconnected
Wireless Details
 Status: Enabled/Disabled
 Clients: The number of attached users.
 Channel: The channel number.
 Name: The name of the primary network. If you have more than one wireless network enabled, the additional
network names will also be listed here.
Modem Details
 Manufacturer: The name of the modem manufacturer (CradlePoint).
 Model: The name of the modem model (Internal LTE, for example).
 Signal: The strength of the signal (dBm).
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 21