IBR600 | USER MANUAL Firmware ver. 3.5.1
CRADLEPOINT
o undefined
Manufacturer: Select from a dropdown list of attached devices.
Model: Select from a dropdown list of attached devices.
Type: Select from the dropdown list of possible WAN types.
o WiMAX
o Modem
o LTE
o Ethernet
o Wireless As WAN
Serial Number: Select from a dropdown list of attached devices.
MAC Address: Select from a dropdown list of attached devices.
Unique ID: Select from a dropdown list of attached devices.
IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port. Default:
500. This is a standard VPN port that usually does not need to be changed.
IKE / ISAKMP NAT-T Port: Internet Key Exchange / Internet Security Association and Key Management Protocol network
address translation traversal port. Default: 4500. This is a standard VPN NAT-T port that usually does not need to be
changed.
NAT-T KeepAlive Interval: Default: 20 seconds. Range: 0-3600 seconds. 20 seconds will be sufficient in almost all
cases.
Tunnel Connect Retry: Default: 30 seconds. Range: 10-255 seconds. 30 seconds will be sufficient in almost all cases.
© 2012 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 125