Cradlepoint IBR600 Product Manual page 158

IBR600 | USER MANUAL Firmware ver. 3.5.1
CRADLEPOINT
 MD5 with DES encryption
 SHA with DES encryption
 MD5 with AES encryption
 SHA with AES encryption
Username: Enter the Username configured on your SNMP host in the username field.
Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be
at least 8 characters long.
Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap
notifications. Trap notifications are returned to the server with SNMPv1.
Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community
name.
Address for trap server: Enter the address of the host system that you want trap alerts sent to.
Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162)
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 156