Assembly Steps; Hardware Bag 1 Contents; Open Hardware Bag - Horizon Fitness CT5.1 Owner's Manual

ASSEMBLY STEP 1

HArDWArE BAG 1 CONTENTS :

BOLT (A)
20 mm
Qty: 4
RUNNING DECK
LEFT
CONSOLE
MAST
FLAT WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
6
SPRING WASHER (B) FLAT WASHER (C)
15 mm 15 mm
Qty: 4 Qty: 4
FOOT LATCH
BASE FRAME
Cut the yellow banding straps and lift the
A
running deck upward until the foot
latch locks. Remove all contents from
underneath the running deck.

Open hardware bag 1.

B
With the running deck in the raised
C
position, attach the left console mast
to the base frame using 4 bolts (a),
4 spring washers (b) and 4 flat
washers (c).
NOTE: Do not completely tighten any
step 4
screws or bolts until is complete!