Activate Your Phone - Kyocera Verve User Manual

Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Plug the USB connector into the charger/accessory jack on the lower left side of your
phone.

Plug the AC adapter into an electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press and hold

If your phone is activated, it will turn on and search for Sprint service.

If your phone is not yet activated, see

Activate Your Phone

Follow the instructions below to activate your phone if it has not already been activated.
Depending on your account or how and where you purchased your phone, it may be ready to
use or you may need to activate it on your Sprint account.
●
If you purchased your phone at a Sprint Store, it is probably activated and ready to use.
●
If you received your phone in the mail and it is for a new Sprint account or a new line of
service, it is designed to activate automatically.
Get Started
to turn the phone on.
Activate Your Phone for more information.
3