If the contact has more than one number, press the navigation key right or left to
display the number you want to assign and then press
softkey).
To remove a number from a speed dial location:
1. From standby mode, press CONTACTS (right softkey).
2. Press OPTIONS (right softkey) > Settings > Speed Numbers.
3. Highlight the assigned contact you want to remove and press OPTIONS (right softkey) >
Remove.
Call Settings
You can configure various call-related settings.
Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated
dialing features.
●
Contacts Match - Retrieve any number saved in your Contacts by entering four or more
digits of any part of the number.
●
Prepend - Prepend the first five or six digits (for example, the area code and prefix) to
any four or five digits you enter.
To activate the prepend feature:
1. Press
> Settings > Others > Call Setup > Abbrev. Dial.
2. Select Prepend > On.
3. Enter a five- or six-digit number and press
To use Abbreviated Dialing:
1. Enter the four or more digits of any part of a Contacts entry's phone number to use the
Contacts Match feature.
– or –
Enter the last four or five digits of the number to use the Prepend feature.
Note: Contacts Match will not retrieve numbers if you enter 911 or reserved three-digit service
numbers such as 411 or 611.
Phone Calls
> REPLACE (left
.
30