IBM System x3620 M3 7376 Installation And User Manual page 74

58
System x3620 M3 Type 7376: Installation and User's Guide
7. Route the tape drive cables through the cage hole on the chassis (see
"Internal cable routing and connectors" on page 31).
8. Connect the tape drive cables:
v USB tape drive: connect the USB signal cable to the system board and the
power cable to the power-supply paddle card
v SATA tape drive: connect the SATA connector to the system board and the
power cable to the power-supply paddle card
9. Slide the tape drive cage forward into the drive bay until the thumbscrew on
the rear of the drive cage align with the screw hole on the chassis.