IBM System x3620 M3 7376 Installation And User Manual page 40

Important:
1. Before you change any switch settings or move any jumpers, turn off the server;
2. Any system-board switch or jumper blocks that are not shown in the illustrations
24
System x3620 M3 Type 7376: Installation and User's Guide
then, disconnect all power cords and external cables. (Review the information in
"Safety" on page vii, "Installation guidelines" on page 28, "Handling
static-sensitive devices" on page 30, and "Turning off the server" on page 18.)
in this document are reserved.