Installing An Optional Dvd Drive - IBM System x3620 M3 7376 Installation And User Manual

9. Tighten the thumbscrew to secure the DVD drive cage in the server.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 78.

Installing an optional DVD drive

For a list of supported optional optical disk drives for the server, see
http://www.ibm.com/servers/eserver/serverproven/compat/us/.
To install an optional DVD drive, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Make sure that the server is turned off, all external cables and power cords are
3. Attach the drive-retention clip to the side of the DVD drive.
4. Slide the DVD drive into the drive bay until the DVD drive clicks into place.
56
System x3620 M3 Type 7376: Installation and User's Guide
on page 28.
disconnected, and the cover has been removed. For more information, see
"Turning off the server" on page 18 and "Removing the cover" on page 37.
Drive retention clip
Alignment pins